• Exclusive representatives for Mason Industries Inc
  • 30 Chaffey Street, Thomastown
  • Melbourne, Australia
  • 1800-0-MASON

FSN Jack Up Floating Floor – Gymnasiums

We believe that the most fool-proof and safest way to establish the air gap is the jack-up or lift-slab method. The FSN system ensures there is no bridging of the two elements due to slurry ingress.
Where the gym is located adjacent to a critical area, light-weight options simply won’t do. We have developed and tested our jack up floating floor systems to be used in gymnasiums. The mason Jack up gymnasium floor is a no compromise solution for footfall, shock and vibration isolations.

Applications – Seismic & Non-Seismic

·         Free Weight Areas

·         Squat Racks

·         Aerobic Rooms

·         CrossFit Gyms

·         Powerlifting areas

Capacity

·         152kg – 1588kg per mount

Deflection

·         5mm – 8mm

Options

·         Seismic Snubber (SFFS)

·         Floor Drain (CFD

Specification

Bell shaped castings with integral lugs to locate reinforcing, shrouding 50mm thick LDS isolators moulded to the following and all other AASHTO bridge bearing specifications. All housings shall have (20mm) minimum diameter jackscrews. Deflections shall not exceed 8mm nor the frequency 9 Hz. Isolators shall be Mason Industries type FSN.

FS Jack Up Floating Floor – Gymnasiums

Situations arise where there is a requirement for a lower natural frequency in the floating floor elements that what can be achieved by a rubber isolator.
The Mason FSN Spring Jack up floor system is the pinnacle of vibration isolation for gymnasium floors in sensitive areas.

Applications – Seismic & Non-Seismic

·         Free Weight Areas

·         Squat Racks

·         Aerobic Rooms

·         CrossFit Gyms

·         Powerlifting areas

Capacity

·         204kg – 1331kg per mount

Deflection

·         25mm – 50mm

Options

·         Seismic Snubber (SFFS)

·         Floor Drain (CFD

Specification

Cylindrical shaped castings with integral lugs to locate reinforcing, shrouding 25-50mm deflection spring isolators. All housings shall have threaded compression plates and a neoprene cup to the base of the spring. Isolators shall be Mason Industries type FS.